ASCEN Odd-form through hole insertion component feeder use to loading the loose insertion component online,it can connect Universal/Yamaha/Assembleon/Panasonic/JUKI/Fuji/NXT automatic insertion machine for automated online feeding or connect the robot for automatic production for replace the artificial.
Vibratory Bowl insertion feeders are used for segregating and orienting component parts in the desired position.The oriented parts can then be fed into chute and then the component can be cut or bend or former and the end be transported to workstation.The inserter vibratory feeder are cast out of Aluminum alloy or are fabricated from stainless steel or mild steel sheets depending on the material of the parts to be fed.The inner side of the bowl is lined with appropriate lining material to reduce wear.
Odd-form through hole insertion component feeder customized steps, please tell us below question:
1.Provide the physical picture for the odd form insertion part and the material size.
2.Your expected speed for feeding
3.Provide the material feeding direction(if require)
4.Component running clockwise or counter-clockwise (if require)
5.Need send us the odd form insertion component sample to precision measurement,and need do test the vibratory bowl feeders before delivery
| ASCEN vibratory bowl feeder AF-VB series | |
| Component type | Electronic components, hardware,plastic parts, connectors |
| Component size | 3*3~50*50mm |
| Component weight | 10g-300g |
| Vibratory Feeding material | Loose component and specified vibratory bowl feeding material |
| Feeding type | Multiple layer multiple tray vibratory bowl for feeding,can feeding different type component from different layer |
| Single layer multiple tray vibratory bowl for feeding,can feeding different type component from different tray | |
| Feeding transfer type | Transmission of vibration |
| Positioning way | fiber sensors |
| Distinguish the polarity | Optional |
| Cutting lead foot | Optional |
| Power | 220V |
| Air pressure | 0.4~0.6Mpa |
| Operation way | Keys operation |
| Signal connection | SMEMA port |
| Communication mode | I/O port or independent control |
| Control way | PLC control system |
| Drive mode | Pipe coil drive |
| Vibratory feeder speed | 0.8 sec. |
| Feeding precision | ±0.5mm |
| Feeding test | Achieve 2 hours of continuous feeding without abnormal |
| Aging Test | No abnormality after continuous operation for 48 hours |
| Life time | About 5 years |
| Dimension | Single layer vibratory bowl feeder with 2 tray: 1120*460*910mm 160kg ; single layer vibrator bowl feeder with 1 tray:760*460*910mm 190kg |
| Multiple vibratory bowl with 2 layer: 800*460*910mm 220kg | |
| Any question please email to: info@ascen.ltd | |
Maybe the following fitting insertion machine feeder can help you(click and see more):
Automated Insertion machine axial feeder Odd form capacitance radial insertion feeder
Automated fitting insertion machine tube feeder Through hole inserter component vibratory feeder
Transistor odd form component insertion feeder Radial taped capacitor insertion feeder
